84
Utilities
Password Utility
Deleting a supervisor password
To delete a supervisor password:
1
To access Supervisor Password from the Start screen
begin typing
Password Utility
, or while in the Desktop
screen double-click or touch the
Desktop Assist
icon.
2
Click or touch
Tools & Utilities
.
3
Click or touch
Password Utility
.
A pop-up screen appears asking for a password.
4
Enter your password, and then click or touch
Verify
.
5
Click or touch
Supervisor Password
.
6
Click or touch
Delete
.
An authority verification pop-up screen appears.
7
Click or touch
Delete
.
8
Enter the password, and then click or touch
Verify
.
9
Click or touch
OK
to exit.
Using a user password
A user password provides power-on password protection.
Setting a user password
If you choose to set a supervisor or user password,
TOSHIBA strongly recommends that you save your
password in a location where you can later access it
should you not remember it.
TOSHIBA is not responsible for any losses that may occur to
you, your organization or others as a result of the inability to
access your computer.
To register a password for the power-on password functions:
1
To access User Password from the Start screen begin
typing
Password Utility
, or while in the Desktop screen
double-click or touch the
Desktop Assist
icon.
