Turning on the power
This section describes how to turn on the power - the
Power
indicator will
then indicate the status. Please refer to the
section in Chapter 5, Power and Power-Up Modes for more information.
After you turn on the power for the first time, do not turn it off until you
have set up the operating system.
Volume cannot be adjusted during Windows Setup.
1.
Open the display panel.
2.
Press and hold the computer's power button for two or three seconds.
Figure 1-5 Turning on the power
1
1. Power button
Product appearance depends on the model you purchased.
Starting up for the first time
The Windows 7 Startup Screen will be the first screen displayed when you
turn on the power. Follow the on-screen instructions on each screen in
order to properly install the operating system.
When it is displayed, be sure to read the Software License Terms
carefully.
Turning off the power
The power can be turned off in one of three modes, either Shut Down
Mode, Hibernation Mode or Sleep Mode.
Shut Down Mode
When you turn off the power in Shut Down Mode no data will be saved and
the computer will boot to the operating system's main screen the next time
it is turned on.
1.
If you have entered data, either save it to the hard disk drive or to
other storage media.
Qosmio X770/X775 Series
User's Manual
1-6
