manualshive.com logo in svg

Toshiba PQG20U-10K00E, User Manual, Page: 273 / 367

Share
Download
Toshiba PQG20U-10K00E User Manual Download Page 273

273

Using the RAID-0 or RAID-1 Utility

TOSHIBA RAID Console Utility

5.375 x 8.375 ver 2.3

❖

Warning

—The threshold value of S.M.A.R.T. has 

been exceeded.

Performing a media check on a RAID-1 array

A media check compares the data of the mirrored hard drives 
in an array to determine if there are any errors.  If an error is 
detected during a media check, the data will be restored on 
the secondary internal hard disk based on the data on the 
primary internal hard disk.

A media check can only be performed on a mirrored array 
which is in an optimal state.  Refer to 

“Viewing the status of 

an array” on page 269

 for more information.

If the computer is performing a media check and the 
computer is restarted, the media check will resume when the 
computer is restarted.

By default the TOSHIBA RAID Utility is set up to perform a 
media check on the 3rd Wednesday of each month at 12:00 
noon.  

To perform a media check:

1

Plug in the AC adapter and power on the computer. (The 
computer must be running on power provided by the AC 
adapter to perform these steps.)

2

Start the TOSHIBA RAID Console utility by clicking 

Start

, 

All Programs

. Then select 

TOSHIBA

, 

RAID

, 

RAID Console

.

3

Click 

Media Check

.

The Confirm media check window appears.

NOTE

Summary of Contents for PQG20U-10K00E
















































































































































































































































































































































































Reviews:

No comments