manualshive.com logo in svg

Toshiba pqg10u-00y00l, User Manual

Share
Download
Toshiba pqg10u-00y00l User Manual Download Page 128

128

Mobile Computing

Changing the main battery

5.375 x 8.375 ver 2.3

Inserting the battery into the computer

Assuming you just removed the battery pack (see 

“Removing 

the battery from the computer” on page 126

):

1

Place the battery module into the battery compartment.

Sample inserting a new battery pack

If the battery does not slide into the slot easily, move the 
battery release lock to the unlocked position and try again. Do 
not force the battery into position.

2

Ensure the battery release latch clicks into place.

3

Slide the battery release lock to the locked position.

4

Turn the computer right side up. 

5

Reconnect the cables and turn on the computer.

The battery pack has been designed so that you cannot install 
it with reverse polarity.

Summary of Contents for pqg10u-00y00l

































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands