manualshive.com logo in svg

Toshiba PORTEGE R500 Series, User Manual

The Toshiba PORTEGE R500 Series brings power, portability, and reliability to your fingertips. With its sleek design and impressive features, this laptop guarantees seamless performance. To get the most out of your device, download the user manual for free at manualshive.com and unlock the full potential of your Toshiba PORTEGE R500 Series.

Share
Download
background image

3-12

User’s Manual

PORTÉGÉ R500

Inserting a PC Card

The Windows hot-install feature allows you to insert PC Cards while the 

computer is turned on.

To insert a PC Card, follow the steps as detailed below:
1. Press the PC Card eject button to partially extend it out of the computer.
2. Press the extended PC Card eject button in order to eject the Dummy 

card partially out of the computer.

3. Grasp the Dummy card and draw it.
4. Insert the PC Card into the PC Card slot on the side of the computer.
5. Press the PC Card gently to ensure a firm connection is made.

Inserting the PC Card

6. After inserting the PC Card you should refer to its documentation and 

also check the configuration in Windows in order to ensure that it is 

correct.

Removing a PC Card

To remove a PC Card, follow the steps as detailed below:
1. Open the 

Safely Remove Hardware

 icon on the Windows Task Bar.

2. Point to 

PC Card

 and click the left Touch Pad control button.

3. Press the PC Card eject button to partially extend it out of the computer.

4. Press the extended PC Card eject button in order to eject the PC Card 

partially out of the computer.

Do not insert a PC Card while the computer is in Sleep Mode or 

Hibernation Mode as you may find that some cards do not work properly.

PC Card

PC Card slot

PC Card eject button

If the PC Card is not inserted all the way into the computer, the eject button 

may not cause it to pop out sufficiently to allows it to be grasped. In this 

instance, simply push the PC Card firmly back into the computer and then 

press the eject button again.

Summary of Contents for PORTEGE R500 Series











































































































































































































Reviews:

No comments

Related manuals for PORTEGE R500 Series

Logik LUPAUSL13E Instruction Manual preview
LUPAUSL13E
Brand: Logik Pages: 52
Acer TravelMate C200 Series Manual Do Utilizador preview
TravelMate C200 Series
Brand: Acer Pages: 82
Acer TravelMate C110 Series User Manual preview
TravelMate C110 Series
Brand: Acer Pages: 94
Acer TravelMate C110 Series Manuel D'Utilisation preview
TravelMate C110 Series
Brand: Acer Pages: 96
Acer TravelMate C200 Series Manuel D'Utilisation preview
TravelMate C200 Series
Brand: Acer Pages: 81
Acer ExtensaTM 670 User Manual preview
ExtensaTM 670
Brand: Acer Pages: 107
Acer Extensa 2900E Manual preview
Extensa 2900E
Brand: Acer Pages: 62
Acer Swift 3 SF314-59 User Manual preview
Swift 3 SF314-59
Brand: Acer Pages: 85
Acer PREDATOR TRITON 300 SE User Manual preview
PREDATOR TRITON 300 SE
Brand: Acer Pages: 97
Acer AN515-57-72SA User Manual preview
AN515-57-72SA
Brand: Acer Pages: 78
Acer Predator PTX17-71 Lifecycle Extension Manual preview
Predator PTX17-71
Brand: Acer Pages: 44
Acer Aspire 5942G Quick Manual preview
Aspire 5942G
Brand: Acer Pages: 13
Fujitsu LIFEBOOK U937 User Manual preview
LIFEBOOK U937
Brand: Fujitsu Pages: 32
Fujitsu LIFEBOOK U904 Quick Start Manual preview
LIFEBOOK U904
Brand: Fujitsu Pages: 2
Fujitsu LIFEBOOK U9311 Quick Start Manual preview
LIFEBOOK U9311
Brand: Fujitsu Pages: 2
Fujitsu LIFEBOOK U9311A Quick Start Manual preview
LIFEBOOK U9311A
Brand: Fujitsu Pages: 2
Fujitsu LIFEBOOK UH552 Operating Manual preview
LIFEBOOK UH552
Brand: Fujitsu Pages: 61
Fujitsu LifeBook U9312 Operating Manual preview
LifeBook U9312
Brand: Fujitsu Pages: 82

Brands by name

Popular brands

Load more brands