Toshiba Portege R30-A Series User Manual Download

Page: 175 / 201

175

TOSHIBA Function Keys

Functions

5.375 x 8.375 ver 2.3

Display brightness

Disabling or enabling wireless devices

Disabling or enabling the touch pad

Fn+

This TOSHIBA Function key decreases the screen
brightness.

Fn+

This TOSHIBA Function key increases the screen
brightness.

Fn+

This TOSHIBA Function key enables/disables the
Wi-Fi

antenna in your computer.

Allow about 5 seconds to switch
between modes.

The wireless modes are:

❖

Disables the wireless antenna
(Airplane mode is ON).

❖

Enables the wireless antenna
(Airplane mode is OFF).

Fn+

This TOSHIBA Function key enables/disables the
touch pad.

To enable/disable the touch pad press

For more information on using the touch pad, see

“Using the touch pad” on page 69

The

Fn + F9

Function key applies

only to the touch pad and not to the
AccuPoint

II pointing device.

NOTE

Summary of Contents for Portege R30-A Series










































































































































































































Search results

Summary of Contents for Portege R30-A Series

Reviews:

Related manuals for Portege R30-A Series

Brands by name

Popular brands

Toshiba Portege R30-A Series, User Manual

Search results

Summary of Contents for Portege R30-A Series

Reviews:

Related manuals for Portege R30-A Series

Brands by name

Popular brands