Toshiba Portege R30-A Series User Manual Download Page 115

Page: 115 / 201

115

Exploring Your Computer’s Features

Using an ExpressCard

(Available on certain models.)

The ExpressCard

slot supports the use of ExpressCard

media. The slot also supports hot swapping, which allows
you to replace one ExpressCard

with another while the

computer is on.

Inserting an ExpressCard

To locate your ExpressCard

slot, please refer to your

Quick Start document.

Before you insert an ExpressCard

, refer to the

documentation that comes with the card to see if you need
to do anything before you insert it.

To insert an ExpressCard

Locate the ExpressCard

slot on the side of the

computer.

You may first need to remove the card slot protector
before you can insert a card.

Insert the ExpressCard

(Sample Illustration) Inserting an ExpressCard

When the card is almost all the way into the slot, push
firmly but gently to ensure a firm connection with the
computer. Do not force the card into position.

NOTE

Summary of Contents for Portege R30-A Series










































































































































































































Search results

Summary of Contents for Portege R30-A Series

Reviews:

Toshiba Portege R30-A Series, User Manual, Page: 115 / 201

Search results

Summary of Contents for Portege R30-A Series

Reviews: