background image

128

Exploring Your Computer’s Features

Using PC Cards

Using PC Cards

TECHNICAL NOTE: For PCMCIA-compatible PC Cards, check the 
package to make sure they conform to the PCMCIA 2.1 standard (or 
later). Other cards may work with your computer, but are likely to be 
much more difficult to set up and use.

Your notebook computer comes with a PC Card slot and supports 
two types of PC Cards that you can install: 

Type I cards

Type II cards

The PC Card slot supports hot swapping, which allows you to 
replace one PC Card with another while the computer is on.

Inserting a PC Card

Before you insert a PC Card, refer to the documentation that comes 
with the card to see if you need to do anything before you insert it. 

To insert a PC Card:

1

Locate the PC Card slot on the left side of the computer.

2

Insert the PC Card.

(Sample Illustration) Inserting a PC Card

3

When the card is almost all the way into the slot, push firmly 
but gently to ensure a firm connection with the computer. Do 
not force the card into position.

Summary of Contents for Portege M405 Series


















































































































































































































































Reviews: