manualshive.com logo in svg

Toshiba Portege A600, Maintenance Manual, Page: 87 / 406

Share
Download
Toshiba Portege A600 Maintenance Manual Download Page 87

2.6 HDD/SSD Troubleshooting 

2 Troubleshooting Procedures 

Procedure 5 

Connector Check and Replacement Check 

The SATA HDD/ SATA SSD may be disconnected, or the 2.5 SATA HDD/ 1.8 SATA SSD, 
2.5HDD FPC/1.8 SSD FPC or system board may be damaged. Disassemble the computer 
following the steps described in Chapter 4, 

Replacement Procedures

 and perform the 

following checks: 

Check 1 

Make sure the SATA HDD/ SATA SSD is firmly connected to CN1900 on the 
system  
board. 

 

In the case of 2.5 SATA HDD model 

  

In the case of 1.8 SATA SSD model 

If any of the connections are loose, reconnect firmly and repeat Procedure 1. If 
there is still an error, go to Check 2. 

PORTEGE A600 Maintenance Manual (960-710) 

 

 [CONFIDENTIAL] 

 2-41 

Summary of Contents for Portege A600























































































































































































































































































































































































































Reviews:

No comments