Toshiba Portege A600 Page 204 Maintenance Manual Download

Page: 204 / 406

Tests and Diagnostics

PORTEGE A600 Maintenance Manual (960-710) [CONFIDENTIAL]

3-80

3.30 Sound Test program

Sound TEST disk cannot be used in PORTEGE A600.

Therefore, please test the sound on Windows OS.

1) Play a music file.

2) click TOSHIBA-> utility -> "PC diagnostic tool." to test the sound

Please check operation of speakers by one of methods.

3.31 3G Test program

Therefore, please test the sound on Windows OS.

All the programs included in EU870 test CD are install.

A procedure should look at ToshibaTestTools_ReleaseNotes.txt.

Please uninstall after the completion of a EU870 test.

Summary of Contents for Portege A600























































































































































































































































































































































































































Search results

Summary of Contents for Portege A600

Reviews:

Related manuals for Portege A600

Brands by name

Popular brands

Toshiba Portege A600, Maintenance Manual

Search results

Summary of Contents for Portege A600

Reviews:

Related manuals for Portege A600

Brands by name

Popular brands