Toshiba Portege 4000 User Manual Download Page 160

Page: 160 / 278

160

WinDVD

Using WinDVD Advanced Features

Panning

Once you are zoomed in on an area of the WinDVD video
window, you can move the zoom window location using the pan
feature.

With the video window in zoom mode, click the pan button,
located in the lower-right corner of the directional button
panel.

With the pointer over the center of the window, drag the
zoomed window up, down, left or right.

The close-up view changes to reflect the new zoom window
location.

Zooming out

To return the video to normal size, click the zoom button. The
video also returns to normal size when you reach the zoom limit.

Adjusting the color balance

You can adjust the DVD color balance. Click the adjustment
button on the main DVD video window toolbar to open the
Adjustment dialog box.

WinDVD Adjustment dialog box

The adjustment dialog box provides another set of sliders for
adjusting volume and brightness. It also provides two color control
sliders.

Summary of Contents for Portege 4000























































































































































































































































































Search results

Summary of Contents for Portege 4000

Reviews:

Related manuals for Portege 4000

Brands by name

Popular brands

Toshiba Portege 4000, User Manual

Search results

Summary of Contents for Portege 4000

Reviews:

Related manuals for Portege 4000

Brands by name

Popular brands