manualshive.com logo in svg

Toshiba PLL23U-00C01C, User Manual

Share
Download
Toshiba PLL23U-00C01C User Manual Download Page 33

User’s Manual

2-6

The Grand Tour

Memory module slot

The memory module slot is located here. The 

memory module slot allows for the replacement 

with an additional memory module. Please refer 

to the 

Additional memory module

 section in 

Chapter 8, 

Optional Devices

for more information.

Battery release latch

Slide and hold this latch into its 'Unlock' position 

in order to release the battery pack ready for 

removal.
For more detailed information on removing the 

battery pack please refer to Chapter 6, 

Power 

and Power-up Modes

.

Battery pack

The battery pack provides power to the computer 

when the AC adaptor is not connected. For more 

detailed information on the use and operation of 

the battery pack please refer to Chapter 6, 

Power and Power-up Modes

. 

Battery safety lock

Slide this latch into its 'Unlock' position in order to 

release the battery pack ready for removal.

Speaker

The speaker emits sound generated by your 

software as well as audio alarms, such as low 

battery condition, generated by the system.

2

1

Summary of Contents for PLL23U-00C01C

















































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands