10
Setting up the Toshiba drive
5.375 x 8.375 ver 2.3
Status indications
After five minutes of inactivity, the drive enters a power-saving mode
to reduce electrical consumption and the indicator light dims. The
next time you access the drive, the drive automatically exits power-
saving mode and resumes normal operation.
Setting up the Toshiba drive
1
Attach the stand
Carefully seat the hard drive into the stand in the vertical
position.
Place the drive on a sturdy, flat surface. Do not place the drive on an
unstable or makeshift base, such as a stack of books, which may be
prone to collapse or toppling.
(Sample Illustration) Attaching the stand
Light status
Indicates
Flashing
The connected computer is reading or writing data on
the drive.
Solid
The drive is powered on but is not currently being
accessed. After five minutes of inactivity, the light dims
when the drive enters power-saving mode.
Flashing rapidly
An error has occurred. Disconnect and then re-connect
the drive to your computer. If the condition is not
cleared, contact Toshiba support.
NOTE
Stand
