Toshiba NB205-N311 User Manual Download Page 69

Page: 69 / 136

User’s Manual

5-5

The Keyboard

Touch Pad:

Pressing

enables or disables the Touch Pad function.

Zoom:

Pressing

Space

changes the display resolution.

TOSHIBA Zooming Utility (reduce):

Pressing

reduces the icon

size on the desktop or the font sizes within one of the supported application

windows.

TOSHIBA Zooming Utility (enlarge):

Pressing

enlarges the icon

size on the desktop or the font sizes within one of the supported application

windows.

Volume down:

Pressing

to decrease the volume in increments.

Volume up:

Pressing

to increase the volume in increments.

FN Sticky key

You can use the TOSHIBA Accessibility Utility to make the

key sticky,

that is, you can press it once, release it, and then press an "

F Number

key. To start the TOSHIBA Accessibility utility, click

Start

All

Programs

TOSHIBA

Utilities

Accessibility

Summary of Contents for NB205-N311









































































































































Search results

Summary of Contents for NB205-N311

Reviews:

Related manuals for NB205-N311

Brands by name

Popular brands

Toshiba NB205-N311, User Manual

Search results

Summary of Contents for NB205-N311

Reviews:

Related manuals for NB205-N311

Brands by name

Popular brands