MR-2019/2018/MY-1034 DISASSEMBLY AND ASSEMBLY 5 - 4
(3)
Paper feed roller removal
1) Pull out the shaft.
2) Remove the clutch boss and the clutch spring from the pickup
roller.
(4)
Pickup roller removal
1) Disengage one pawl.
2) Remove the pickup drive gear from the pickup roller.
I.
Paper empty sensor
(1)
Paper feed PG unit removal
1) Remove the harness.
2) Remove three screws.
3) Lift the front side, and remove the paper feed PG unit.
(2)
Paper feed PG support plate removal
1) Remove one screw.
2) Slide and remove the paper feed PG support plate.
(3)
Paper empty sensor removal
1) Disconnect one connector.
2) Remove the paper empty sensor.
J. PS roller
(1)
Parts removal
1) Remove the gear.
2) Remove the pulley.
3) Remove the belt.
1
2
1
3
2
2
3
2
1
2
1
2
1
1
3
2
