Toshiba MMY-MAP0804FT7(Z), Service Manual, Page: 269 / 333

– 269 –
Reactor assembly
No. Part to be replaced Work procedure Remarks
5
WARNING
Wear a pair of gloves.
Otherwise, you will risk an injury involving a
replacement part or some other object.
1. Detachment
1) Stop the operation, and turn off the circuit breaker.
2) Remove the inverter assembly.
(See the inverter assembly dismantling method
under item 4.)
3) With a 12, 14HP unit, remove the separately
mounted reactor box.
To remove the reactor box, remove the screws at
the top and bottom (M5 × 10) and unlock the box
by sliding the stopper to the right.
* Before pulling the reactor box, tilt it back to free
the bottom.
With a 12, 14HP unit, remove the separately
mounted anchor plate.
(M4 × 6, 4 pcs.)
4) Remove the reactor box located at the back of the
inverter assembly.
(M4 × 6, 4 pcs.)
* The screws can be removed from the front.
5) Remove and replace the reactor.
(M4 × 6, 1 pc.)
• 8, 10HP case
• 12, 14HP case
3) Screw
3)
Fixing claw (slide stopper to right)
Fixing claw (slide stopper to right)
Screw
4) Screws (2 locations)
4) Screws (2 locations)
4) Screws (2 locations)
4) Screws (2 locations)
AMP Air Conditioning www.ampair.co.uk | sales@ampair.co.uk