22-EN
Installation Manual
– 22 –
Power supply wire and communication wires specifications
Power supply wire and communication wires are procured locally.
For the power supply specifications, follow the table below. Power supply wiring and communication wiring
are to be procured locally.
For specifications of the power capacity of the outdoor unit and the power supply wires, refer to the
Installation Manual supplied with the outdoor unit.
Indoor unit power supply
main switch can be used.
in conformity with Design H07 RN-F or 60245
IEC 57
.
Power supply
Control wiring, Central controller wiring
outdoor wire plus the length of the central control communication wire.
Power supply
er or power supply wiring/fuse rating for indoor units should be selected by
9a+]
Ɣ
2
,
in conformity with Design H07RN-F or
60245 IEC 57.
▼
Communication line
TU2C-Link models (U series) can be combined with TCC-Link models (other than U series).
For details of communication type, refer to the following table.
Communication type and model names
Communication
type
TU2C-Link
(U series and future models)
TCC-Link
(Other than U series)
Outdoor unit
MMY-MUP
***
This letter indicates U series model.
Other than U series
MMY-MHP
***
MCY-MHP
***
MMY-MAP
***
Indoor unit
MM
*
-UP
***
This letter indicates U series model.
Other than U series
MM
*
-AP
***
Wired remote
controller
RBC-ASCU
***
This letter indicates U series model.
Other than U series
Wireless remote
controller kit &
receiver unit
RBC-AXU
***
This letter indicates U series model.
Other than U series
U series outdoor unit : SMMS-u (MMY-MUP
***
)
Other than U series outdoor unit : SMMS-i, SMMS-e etc. (MMY-MHP
***
)
