manualshive.com logo in svg

Toshiba L70-C, User Manual

Share
Download
Toshiba L70-C User Manual Download Page 42

Hard Disk Drive

The capacity of the hard disk drive varies
depending on the model.
To check which type of HDD is included in your
model, open the TOSHIBA PC Health Monitor
utility by clicking 

PC Health Monitor

 under

TOSHIBA

 group in 

All apps

, and then click 

PC 

Information

.

Note that part of the hard disk overall capacity is
reserved as administration space.

Legal Footnote (Hard Disk Drive (HDD) Capacity)
For more information regarding Hard Disk Drive (HDD) Capacity, refer to
the 

Legal Footnotes

 section.

Video RAM

The memory in the graphics adaptor of the
computer, used to store the image displayed on a
bitmap display.
The amount of Video RAM available depends on
the system memory of the computer.
Click 

Control Panel -> Appearance and 

Personalization -> Display -> Adjust 
resolution

 under 

Windows System

 group in 

All 

apps

.

The amount of Video RAM can be verified by
clicking the 

Advanced settings

 button in the

Screen Resolution window.

Memory module

The memory module is installed in the computer.

Legal Footnote (Memory (Main System))
For more information regarding Memory (Main System), refer to the 

Legal

Footnotes

 section.

Graphics Processing
Unit

Graphics processing unit (GPU) performance
might vary depending on product model, design
configuration, applications, power management
settings and features utilized. GPU performance
is only optimized when operating in AC power
mode and might decrease considerably when
operating in battery power mode.

Legal Footnote (Graphics Processing Unit (GPU))
For more information regarding Graphics Processing Unit (GPU), refer to
the 

Legal Footnotes

 section.

User's Manual

3-9

Summary of Contents for L70-C






























































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands