Toshiba IPedge User Manual Download Page 161

Page: 161 / 322

IPedge UG 01/13

TOSHIBA

157

Buttons

This chapter shows how to use and add, delete or edit button and button
banks.

Programmable
Buttons

To access Buttons

There are three methods to access buttons:

1. Click on the Personal Call Handler button

and then the Buttons

tab.

2. There are nine pre-loaded buttons at the center of the Call Manager

screen (shown below).

3. Only the More Buttons companion application tabs have more buttons.

These buttons can also be undocked using the dock / undock

button on the left. You can create tabs of more buttons. There are 8

banks with a total of up to 64 buttons each. Each Buttons application can
be assigned to one of these 8 banks, which means the buttons in that

Summary of Contents for IPedge



































































































































































































































































































































Search results

Summary of Contents for IPedge

Reviews:

Related manuals for IPedge

Brands by name

Popular brands

Toshiba IPedge, User Manual

Search results

Summary of Contents for IPedge

Reviews:

Related manuals for IPedge

Brands by name

Popular brands