IP
edge
& Strata CIX
Getting Started
IP4000-series UG November, 2011
TOSHIBA
9
Configuring the
STATUS LED on the
handset
The STATUS LED at the top of the handset has three available colors, red, green
and yellow, which are configurable by the user. You can specify what color the
STATUS LED turns when you missed a call, have a new voice message, or need
to recharge the battery.
1.
Press
Menu
to open the main menu screen.
2.
Select the General Settings icon, then select LED signal.
3.
Select RED LED, then choose what you want the red LED to mean.
4.
Press
End
to go back one menu level, then repeat the same selection with
the Green LED and Yellow LED.
5.
For future reference, record your settings in the table on the following page.
For example, if you set the LED to turn yellow when you miss a call, place an
X under Missed call on the YELLOW LED row.
Using the Menus
•
To open the menu, press
Menu
. The handset displays the main menu screen
below.
•
Use the four-way key to move the cursor and highlight items. When you
highlight each item, the handset shows the current setting for that item in the
display.
•
To select the highlighted item, press Select.
•
To go back one level in the menu, press End.
•
If you don't press any keys for 1 minute, the handset exits the menu.
Main Menu
Screen
LED color
Missed call
Voice mail
Low Battery
None (Off)
RED
GREEN
YELLOW
Contacts
Central Directory
Calls
Connectivity
Settings
Audio
Alarm
