GENERAL SYSTEM CONFIGURATION
Configure the Network Settings
1-14
IP4100 Install Sept., 2013
Configure the Network
Settings
1.
In the left hand panel, select
Network
. This opens the Network
screen.
Note:
Toshiba recommends using static IP addresses.
Figure 1-10 Network Settings Screen
2.
Enter the correct settings for your network and click Save. Refer to
Chapter 3 – Software Reference
if you need more information on
these fields.
3.
Normally, you need to reboot the base station to activate new network
settings. However, during initial configuration, wait until you configure
the rest of the screens before rebooting. (Changing the Time
Settings, for instance, will force a reboot.)
