Toshiba IP EDGE User Manual Download Page 107

Page: 107 / 242

edge

Using Call Manager Features

IPedge UG 11/11

TOSHIBA

103

Status Messages

and DND

Status messages is available under the DND Off option.

Setting a Status Message

1. Click the

button to bring up the Set Status Message window.

The following screen displays.

2. Change the selection to Status Msg Only On

3. Use the pull down listing and select a Status Message.

4. When needed enter additional information on the Custom 2nd Line.

5. Click the Save button when done. The status message will appear on the

DSS keys throughout the system.

Turning Off DND or Message Only

1. Click the

button to bring up the or Status Message window.

2. Click the Msg Off radio button to remove the Status Message.

Summary of Contents for IP EDGE



















































































































































































































































Search results

Summary of Contents for IP EDGE

Reviews:

Related manuals for IP EDGE

Brands by name

Popular brands

Toshiba IP EDGE, User Manual

Search results

Summary of Contents for IP EDGE

Reviews:

Related manuals for IP EDGE

Brands by name

Popular brands