Toshiba IP EDGE User Manual Download Page 105

Page: 105 / 242

edge

Using Call Manager Features

IPedge UG 11/11

TOSHIBA

101

or press the Answer Hot Key (F9).

Note: Call Manager must have focus for the key to work.

Hang Up

Hanging Up or Disconnecting Calls

•

When the call is completed, click the hangup button to disconnect the call

or right-click on the call in the Call View Window and select
Hangup.

or press the Hangup Hot Key (F12). Note: Call Manager must have focus for the
key to work.

Holding Calls

To Place Call on Hold

•

While talking with a caller, click the hold button to place call on
hold

or right-click on the call in the Call View Window and select Hold
from the menu.

To Retrieve Call

•

To re-connect a held call, click the hold button again

or press the answer button.

or double-click on the held call in the Call View Window

or right-click on the held call and select Answer from the menu.

Transferring

Calls

Using Transfer Button

1. While talking with a caller, click the transfer button to get

intercom dial tone

or right-click on the call in the Call View Window and select Transfer.

2. Using the keyboard enter the number to transfer the caller to, press Enter

when done.

or use the on-screen dial pad and dial the number. Once the system recognizes a
valid number, the call will proceed automatically.

Using Drag and Drop

•

While talking with a caller, use the mouse to drag and drop the call from the
Calls Window onto a DSS button for immediate transfer to another station.

or use the mouse to drag and drop the call from the LCD display window onto a
DSS button for immediate transfer to another station.

Summary of Contents for IP EDGE



















































































































































































































































Search results

Summary of Contents for IP EDGE

Reviews:

Related manuals for IP EDGE

Brands by name

Popular brands

Toshiba IP EDGE, User Manual

Search results

Summary of Contents for IP EDGE

Reviews:

Related manuals for IP EDGE

Brands by name

Popular brands