Toshiba IK-WR14A User Manual Download Page 32

Page: 32 / 123

Advanced Mode

Each function on the configuration list will be explained in the following sections. Those functions that are
displayed only in Advanced Mode are marked with Advanced Mode . If you want to set up advanced

functions, please click on

[Advanced Mode]

at the bottom of the configuration list.

The Navigation Area provides access to all different views from the

Home

page (for live viewing) and

Configuration

page.

System > General settings

This section explains how to configure the basic settings for the Network Camera, such as the

host name and system time. It is composed of the following two columns: System and System

Time.

System

Host name: Enter a desired name for the Network Camera. The name will be displayed at the top center

of the main page.

Turn off the LED indicator : To disable the status LED light, uncheck this option.

Configuration List

Click to switch to Basic Mode

Firmware Version

Navigation Area

Summary of Contents for IK-WR14A




























































































































Search results

Summary of Contents for IK-WR14A

Reviews:

Related manuals for IK-WR14A

Brands by name

Popular brands

Toshiba IK-WR14A, User Manual

Search results

Summary of Contents for IK-WR14A

Reviews:

Related manuals for IK-WR14A

Brands by name

Popular brands