17
17
POWER
COLLISION
LINK
RECEIVE
PARTITION
1
2
3
4
5
General Connection (without PoE)
1. Connect the camera to an Ethernet switch via LAN cable.
2. Connect the power cable from a power unit (not supplied) to the power socket.
3. Connect the PC to an Ethernet switch via Ethernet cable.
NOTE
l
The recommended power supply for this camera is 6 watts minimum.
l
When PoE is connected, don't supply DC12V.
l
Spec of DC plug is mentioned below.
1
2
3
Ethernet switch
(not supplied)
Client PC
(not supplied)
Unit : mm
