background image

22

Introduction

FCC (USA)-INFORMATION

NOTE: 

This equipment has been tested and found to comply with the limits for a Class B 

digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide 
reasonable protection against harmful interference in a residential installation. This equipment 
generates, uses and can radiate radio frequency energy and, if not installed and used in 
accordance with the instructions, may cause harmful interference to radio communications. 
However, there is no guarantee that interference will not occur in a particular installation. If 
this equipment does cause harmful interference to radio or television reception, which can be 
determined by turning the equipment off and on, the user is encouraged to try to correct the 
interference by one or more of the following measures:

l

 

Reorient or relocate the receiving antenna.

l

 

Increase the separation between the equipment and receiver.

l

 

Connect the equipment into an outlet on a circuit different from that to which the receiver is

connected.

l

 

Consult the dealer or an experienced radio/TV technician for help. 

USER-INSTALLER CAUTION:

 

Your authority to operate this FCC verified 

equipment could be voided if you make changes or modifications not expressly approved by 
the party.

Summary of Contents for IK-WF51R


























Reviews: