78
Camera Control
This section explains how to control the Network Camera’s Pan/Tilt/digitl Zoom operation via
the control panel and how to preset positions.
Preset Positions
You can preset positions for the Network Camera to go to directly or patrol. A total of 20 preset positions
can be configured.
Please follow the steps below to preset a position:
1. Adjust the shooting area to the desired position using the buttons on the right side of the window.
2. Click
Set as home
or
Default home
to define your home position.
3. Enter a name for the preset position, which allows for up to forty characters. Click
Add
to enable the
settings. The preset positions will be displayed under the Preset Location list on the left-hand side.
4. To add additional preset positions, please repeat steps 1~2.
5. To remove a preset position from the list, select it from the drop-down list and click
Delete
.
6. The preset positions will also displayed on the main page. Please refer to the illustration on the next
page.
7. Click
Save
to enable the settings.
Functions are the same
as the Control Panel on
the home page
1
2
5
7
3
3
