background image

1

For Customer Use

Enter below the Serial No.
w h i c h   i s   l o c a t e d   o n   t h e
bottom of the cabinet. Re-
tain this information for fu-
ture reference.

Model No.: IK-SX1L

IK-SX1

Serial No.:

CCD CAMERA

IK-SX1L/IK-SX1

INSTRUCTION MANUAL

WARNING

This is a Class A of EN55022 product. In a domestic environment this product may cause radio
interference in which case the user may be required to take adequate measures.

INFORMATION

This equipment has been tested and found to comply with the limits for a Class A digital device,
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection
against harmful interference when the equipment is operated in a commercial environment.
This equipment generates, uses, and can radiate radio frequency energy and, if not installed and
used in accordance with the instruction manual, may cause harmful interference to radio com-
munications. Operation of this equipment in a residential area is likely to cause harmful interfer-
ence in which case the user will be required to correct the interference at his own expense.

USER-INSTALLER CAUTION:

 Your authority to operate this FCC verified equipment could be voided

if you make changes or modifications not expressly approved by the party responsible for compli-
ance to Part 15 of the FCC rules.

This Class A digital apparatus complies with Canadian ICES-003.

Cet appareil numérique de la classe A est comforme à la norme NMB-003 du Canada.

Summary of Contents for IK-SX1

























Reviews: