30
GX7R ASD Quick Start Guide
MON/PRG
(Monitor/Program) — Provides a means to access the three root menus. Pressing the
MON/
PRG
key repeatedly loops the system through the three root menus (see
). While
looping through the root menus, the
Program
menu will display the last menu screen or sub-menu item
being accessed at the time that the
MON/PRG
key was pressed.
Run Key
— Issues the
Run
command while in the
Local
mode.
Run Key Status LED
—
Illuminates green while stopped or red while running (Red = ALERT!).
Figure 19. The GX7R ASD EOI (Electronic Operator Interface).
EOI Operation
The EOI is the primary input/output device for the user. The EOI may be used to monitor system
functions, input data into the system, or perform diagnostics.
Note:
The
Up/Down
arrow keys and the
Enter
key may be used to perform the functions of the
Rotary Encoder
. The
Rotary Encoder
will be used in this explanation and throughout
this guide for the
Up
,
Down
,
and
Enter
key functions.
The software used with the
GX7R ASD
is menu driven; thus, making it a select and click environment.
The operating parameters of a motor may be selected and viewed or changed using the EOI.
To change a parameter setting, go to the
Program
mode by pressing the
MON/PRG
key until the
Program
menu is displayed. Turn the
Rotary Encoder
until the desired parameter group is within the
cursor block. Press the
Rotary Encoder
(repeat if there is a submenu).
Once at the desired selection, press the
Rotary Encoder
. The selection will take on the reverse video
format (dark background/light text). Turn the
Rotary Encoder
to change the value of the parameter. Press
the
ESC
key while the display is in the reverse video mode to exit the menu without saving the change or
press the
Rotary Encoder
to accept the new setting.
Repeated
ESC
key entries takes the menu back one level each time the
ESC
key is pressed until the root
level is reached. After reaching the root level, continued
ESC
entries will toggle the system to and from
the
screen and the
.
Note:
Panel
menu changes entered here will affect EOI-controlled ASD operation only. See
for further information on
operations.
LCD Display
Up/Down Arrow
Keys
Rotary Encoder
Local
|
Remote
Monitor/Program
Key
Enter Key
ESC Key
Stop
|
Reset Key
Key (LED)
Run Key
(LED)
Summary of Contents for GX7R ASD
Page 1: ...GX7R ASD Quick Start Guide TOSHIBA GX7R ASD Quick Start Guide DN 68986 002 September 2014 ...
Page 2: ...GX7R ASD Quick Start Guide DN 68986 002 September 2014 ...
Page 76: ...68 GX7R ASD Quick Start Guide Figure 23 480 Volt 30 100 HP GX7R ASD ...
Page 77: ...GX7R ASD Quick Start Guide 69 Figure 24 480 Volt 125 150 HP GX7R ASD ...