107
If you have problems
Frequently asked questions
❖
Resetting the gigabeat
®
will not initialize the settings. To
initialize the settings, select
settings
then
restore original
settings
.
❖
If subscription data cannot be played, connect the gigabeat
®
to
a computer and synchronize the gigabeat
®
with Windows
Media
®
Player 11 or 10.
❖
Do not press the reset switch until all other options have been
tried. Only use it when you cannot restore normal operation by
turning the gigabeat
®
off and then on again.
Frequently asked questions
Q: Your computer does not recognize the gigabeat
®
.
A: The gigabeat
®
may not be recognized if it is connected to your
computer via a USB hub. Connect the gigabeat
®
to your computer
without using a USB hub.
Q: Audio data cannot be transferred to the gigabeat
®
.
A: Some audio data may not be playable on the gigabeat
®
and
cannot be transferred to the gigabeat
®
. For the types of audio data
playable on the gigabeat
®
, refer to “Combinations of Sampling
Frequencies and Bit Rates.”
Q: I have changed the gigabeat
®
display language, but I do not
know how to change it back to the original setting.
A: Select the previous language by following the steps below:
1
Press the Start button to display the start screen.
2
Select the last item, and press the OK button.
3
Select the sixth item from the top, and press the OK button.
4
Select the top item, and press the OK button.
5
Select the previous language you want to change back to, and
press the OK button.
A confirmation message will appear.
6
Press the Left or Right button on the PlusPad™ to select the
option on the left, and press the OK button.
The gigabeat
®
will restart. When the gigabeat
®
restarts, the display
language will be changed.
NOTE
