Toshiba GA-1191, Setup Manual

Page: 113 / 156

Setting up Print Service Settings (Printing Function) 111
Setting up Print Service Settings (Printing Function)
In the Print Service submenu page in the Setup menu, an administrator can configure such print
services as Raw TCP Print, LPD Print, IPP Print, and NetWare Print.
Some settings may not apply to the LCD of this equipment as soon as you save the settings.
The settings will be updated by pressing the [FUNCTION CLEAR] button on the Control Panel
or after an Auto Clear time period.
Setting the print service settings
1
Access TopAccess in the administrator mode.
P.50 “Accessing TopAccess”
2
Click the Setup menu and Print Service submenu.
The Scan to Print Service submenu page is displayed.
3
In the Print Service submenu page, set the Print Service settings as
required.
In the Print Service submenu page, you can set the following:
P.112 “Setting up the Raw TCP print”
P.113 “Setting up the LPD print”
P.113 “Setting up the IPP print”
P.114 “Setting up the NetWare print”