3
5.375 x 8.375 ver 2.3
Radio Frequency (RF) Energy Exposure
When the transmitter and receiver on your device is powered ON, RF
energy is received and transmitted. The power level your device
transmits at is controlled by your network access while in
communication.
Your device is approved to the radio standard by the country/region
listed in the approved countries table for the module installed in your
device.
FCC Notice “Declaration of Conformity
Information”
This equipment has been tested and found to comply with the limits for
a Class B digital device, pursuant to Part 15 of the FCC rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation.
This equipment generates, uses and can radiate radio frequency energy
and, if not installed and used in accordance with the instructions, it may
cause harmful interference to radio communications. However, there is
no guarantee that interference will not occur in a particular installation. If
this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or
more of the following measures:
❖
Reorient or relocate the receiving antenna.
❖
Increase the separation between the equipment and receiver.
❖
Connect the equipment to an outlet on a circuit different from
that to which the receiver is connected.
❖
Consult the dealer or an experienced radio/TV technician for
help.
Only Peripherals complying with the FCC Class B limits may be
attached to this equipment. Operation with noncompliant
peripherals or peripherals not recommended by Toshiba is likely
to result in interference to radio and TV reception. Shielded
cables must be used between the external devices and the
device's ports. Changes or modifications made to this
equipment not expressly approved by Toshiba or parties
authorized by Toshiba could void the user's authority to operate
the equipment.
NOTE
