Toshiba ES9455 MFP Copying Manual Download Page 62 | Manualshive

Page: 62 / 208

Toshiba ES9455 MFP Copying Manual Download Page 62

3 BASIC COPY MODES

60 Paper Selection

Copying mixed-size originals in one operation

You can copy a set of originals whose sizes are individually different, using the RADF (Reversing Automatic Document
Feeder).
The original sizes that can be mixed are as follows:
North America: LD, LG, LT, LT-R, COMP
Other than North America: A3, A4, A4-R, B4, B5, FOLIO

1

Place paper in the tray(s).

The MPT cannot be used. Use the trays.

2

Adjust the side guides to the widest original, and then align the originals against the
side guide on the front side.

When copying originals of different widths, the copied image of the smaller one may be skewed because it does
not touch the side guide on the rear side.

3

Press [ZOOM] on the touch panel.

When original widths are the same

When original widths are not the same

«
...
60
61
62
63
64
...
»

Summary of Contents for ES9455 MFP

















































































































































































































Reviews:

No comments