Toshiba ES9455 MFP, Copying Manual, Page: 20 / 208

1 BEFORE USING EQUIPMENT
18 Placing Paper
4
Press [CLOSE] on the touch panel or the [SETTING] button on the control panel.
„
Setting paper type
When you place any special paper other than plain paper or that not used for normal copying, you need to set the
thickness and attribute into this equipment.
y The thickness and attribute can be set together.
y When the thickness “THICK 1 or 3”, or an attribute other than “NONE” is set for a tray, the paper placed in this tray
will not be used for the automatic paper selection mode.
y
When an attribute other than “NONE” is set for a tray, the Automatic Change of Paper Source function (Feeding the
same size of paper from a different tray even if the specified tray from which paper is being fed is empty) is
disabled for the paper in this tray.
For how to set Automatic Change of Paper Source, refer to the
MFP Management Guide .
y
The set paper type appears on the equipment status indication area with an icon.
P.10 “Equipment status indication area”
Acceptable paper types are as follows:
Thickness
Button Description Icon
PLAIN
Plain paper: 60 - 105 g/m
2
(16 - 28 lb. Bond)
—
THICK 1 Thick paper
THICK 1: 106 - 163 g/m
2
(29 lb. Bond - 90 lb. Index)
THICK 2: 164 - 209 g/m
2
(91 lb. Index - 110 lb. Index) for ES9475 MFP Series only
THICK 3: 210 - 256 g/m 2 (111 lb. Index - 140 lb. Index) for ES9475 MFP Series only
, ,
RECYCLED
PAPER Recycled paper