manualshive.com logo in svg

Toshiba ES9455 MFP, Copying Manual, Page: 172 / 208

Share
Download
Toshiba ES9455 MFP Copying Manual Download Page 172

6 TEMPLATES

170    Registering Templates

Even when the automatic start function is enabled, you need to enter the user name and password when 
recalling the template in the following cases. For details of the User Authentication for Scan to E-mail and the 
user management function, ask your administrator.

y

When the User Authentication for Scan to E-mail is enabled and the user management function is disabled

y

When both the User Authentication for Scan to E-mail and the user management function are enabled, but 
the user names and passwords are different

When you have entered all the necessary items, press [SAVE].
The template is now registered and the menu returns to the one immediately before registration.

„

Creating a new private group

1

Press [TEMPLATE] on the touch panel.

The template menu appears.

2

Select a group.

1) Press the [REGISTRATION] tab.
2) Select the desired group by pressing its button or keying in its group number (3 digits).
3) Press [OPEN].

To switch the menu

Press  

or .

Summary of Contents for ES9455 MFP

















































































































































































































Reviews:

No comments