manualshive.com logo in svg

Toshiba ES9455 MFP, Copying Manual, Page: 144 / 208

Share
Download
Toshiba ES9455 MFP Copying Manual Download Page 144

4 EDITING FUNCTIONS

142    Omit Blank Page

Omit Blank Page

You can remove blank sheets included in the scanned originals before copying is started. This function is called “omit 
blank page”.

y

This function may not properly detect blank sheets included in the following types of originals:

- Half-tone originals
- Originals including sheets almost blank (e.g. blank pages having only page numbers)

y

If you copy 2-sided originals including blank sheets to 2-sided copy while this function is enabled, the front and 
back sides of the originals and the copies will not match.

The sensitivity to detect blank pages can be changed. For details, refer to the 

MFP Management Guide

.

1

Place paper in the tray(s).

When using Copying from MPT, be sure to set the paper size.

2

Place the original(s).

3

Press [OMIT BLANK PAGE] on the EDIT menu.

4

Press [OK].

Omit blank page is now set.

1

3

5

6

1

3

5

6

Summary of Contents for ES9455 MFP

















































































































































































































Reviews:

No comments