manualshive.com logo in svg

Toshiba ES9455 MFP, Copying Manual, Page: 139 / 208

Share
Download
Toshiba ES9455 MFP Copying Manual Download Page 139

4 EDITING FUNCTIONS

 ADF -> SADF    137

ADF -> SADF

You can switch the feeding mode when the RADF (Reversing Automatic Document Feeder) is used, from “ADF” to 
“SADF”. The paper feeding mode has 2 types as follows:

ADF (Continuous feed mode):

 Feeds originals continuously when you press the [START] button on the control panel 

while originals are being placed on the RADF. This is useful when you make more than one copy in one operation. 
(Default setting)

SADF (Single feed mode):

 Feeds originals one by one automatically. This is useful when you usually only have 1 original.

When the single feed mode (SADF) is set, place originals one sheet at a time. If you place more than one original, the 
copied image may be skewed or the originals may misfeed.

1

Place paper in the tray(s).

2

Press [ADF -> SADF] on the EDIT menu.

3

Press [OK].

The feeding mode is now set at “single feed mode”.

4

Select other copy modes as required.

Summary of Contents for ES9455 MFP

















































































































































































































Reviews:

No comments