Chapter 11: Optional Functions
191
the command is not recognized, a rejection tone sounds and the
screen does not change.
User Command
You can define voice commands on Command Settings.
There are two kinds of commands:
•
Commands to insert texts
•
Commands to launch applications.
To use the commands to insert texts:
1.
On the
User Commands
tab in the Voice Command Settings, define
a phrase you like to a command. For example, define “Thank you for
your email about “for the command
insert text one.
2.
Open the Inbox, then tap
New
from the command bar. At the creat-
ing the message screen, say “
insert text one
.” The “Thank you for
your email about “is displayed on the screen.
To use the commands to launch applications:
1.
On the
User Commands
tab in the Voice Command Settings, assign
an application you like to a command. For example, assign Solitaire
to the command
run program one
.
2.
Say “
run program one
.” The Solitaire screen is displayed.
Using Voice Command for Each Application
For example, you can use voice commands in the Calendar application.
1.
With the Calendar open, say “
Very next appointment
.” The listing
mode screen appears, and it starts reading out very next appoint-
ment. You can display the screen also by saying, “
Move to listing
mode
.” For detail of the command list, refer to the Commands tab on
the Voice Command Settings.
When you say an undefined command, nothing happens
even if the command is recognized.
NOTE
