Toshiba e-STUDIO557 Copying Manual Download Page 157

Page: 157 / 180

6.TEMPLATES

Deleting Groups or Templates 155

6 TEMPLATES

Deleting templates

In the template menu, select the group to which the desired template is registered.

1) Press the [REGISTRATION] tab.
2) Select the desired group by pressing its button or keying in its group number (3 digits).
3) Press [OPEN].

To switch the menu

Press

or .

Enter the password as follows and then press [OK].

When the public template group is selected:

Press [PASSWORD] and then enter the Admin

Password (6 to 64 characters) with the buttons on the touch panel or the digital keys on the control
panel.

When a private group is selected:

Press [PASSWORD] and then enter the password (up to 20

characters) with the buttons on the touch panel or the digital keys on the control panel. If no
password is set, go to step 3.

Summary of Contents for e-STUDIO557




















































































































































































Search results

Summary of Contents for e-STUDIO557

Reviews:

Brands by name

Popular brands

Toshiba e-STUDIO557, Copying Manual

Search results

Summary of Contents for e-STUDIO557

Reviews:

Brands by name

Popular brands