manualshive.com logo in svg

Toshiba e-Studio477s, Advanced Manual, Page: 182 / 264

Share
Download
Toshiba e-Studio477s Advanced Manual Download Page 182

SETTING ITEMS (ADMIN)

- 182 -

2

1

3

4

5

6

7

3

Confirm the settings and press [OK].

You will be returned to the NETWORK menu.

Memo

• The IPv6 address acquired from the DHCPv6 server is 

displayed.

Setting the IPX/SPX protocol

You can set the IPX/SPX protocol in this equipment. The IPX/
SPX protocol is normally used to communicate with the 
NetWare file server through the network.

Setting the NetWare settings

You can set the NetWare configuration to be connected.

Note

• This option must be set when you use the NetWare file 

server for Novell printing.

Memo

• When you press [CONTEXT], [TREE] or [FILE SERVER 

NAME], the on-screen keyboard is displayed.
For details of the on-screen keyboard, see the following 
page:

P.227 "On-screen keyboard"

• You can enable both bindery and NDS modes at the same 

time.

Item name

Description

ENABLE IPX/SPX

•

ENABLE

 — Press this button to use 

the IPX/SPX protocol in this 
equipment.

•

DISABLE

 — Press this button to 

disable the IPX/SPX protocol.

FRAME TYPE

Press [AUTO] to automatically detect 
the appropriate frame type, or press a 
specific frame type button. If you do not 
know the frame type that must be used, 
select [AUTO].

Item name

Description

ENABLE Netware

•

ENABLE

 — Press this button to 

use the NetWare protocol.

•

DISABLE

 — Press this button to 

disable the NetWare protocol.

ENABLE 
BINDERY

•

ENABLE

 — Press this button to 

enable communication with the 
NetWare file server in bindery 
mode.

•

DISABLE

 — Press this button to 

disable communication with the 
NetWare file server in bindery 
mode.

ENABLE NDS

•

ENABLE

 — Press this button to 

enable communication with the 
NetWare file server in NDS mode.

•

DISABLE

 — Press this button to 

disable communication with the 
NetWare file server in NDS mode.

CONTEXT

Press this button to enter the NDS 
context in which the NetWare print 
server for this equipment is located. 
This must be entered when you 
connect the NetWare file server in the 
NDS mode.

TREE

Press this button to enter the NDS tree. 
This must be entered when you 
connect the NetWare file server in the 
NDS mode.

FILE SERVER 
NAME

Press this button to enter the NetWare 
file server name. It is recommended 
that this be entered when you connect 
the NetWare file server in bindery 
mode.

Summary of Contents for e-Studio477s









































































































































































































































































Reviews:

No comments