manualshive.com logo in svg

Toshiba e-Studio477s, Advanced Manual, Page: 170 / 264

Share
Download
Toshiba e-Studio477s Advanced Manual Download Page 170

SETTING ITEMS (ADMIN)

- 170 -

2

1

3

4

5

6

7

Setting the default language

1

On the LANGUAGES screen, select the 
language to be used as the default, and 
press [SET DEFAULT].

The mark 

 is displayed beside the selected language.

2

Press [OK].

The setting is completed, and you will be returned to the 
previous screen.

Updating your system

You can install files for updating the system of your equipment.

Memo

• To obtain the updating files, contact your dealer.
• Before performing the operation, store the updating files in 

the root directory of your USB storage device in advance.

1

Press [SYSTEM UPDATES] on the 
GENERAL menu (2/2) screen.

The SYSTEM UPDATES screen is displayed, and you 
can view the software currently installed and the 
respective versions.

2

Press [INSTALL].

A message appears prompting you to insert the USB 
storage device.

3

Connect your USB storage device in which 
the files for updating the system are stored 
to the USB port on the equipment, and 
press [OK].

The USB LIST screen is displayed.

4

Select the file type, and press [OK].

The SYSTEM UPDATES screen is displayed.

Summary of Contents for e-Studio477s









































































































































































































































































Reviews:

No comments