manualshive.com logo in svg

Toshiba e-Studio477s, Advanced Manual, Page: 159 / 264

Share
Download
Toshiba e-Studio477s Advanced Manual Download Page 159

2

1

3

4

5

6

7

SETTING ITEMS (ADMIN)

- 159 -

●

SETTING ITEMS (ADMIN)

Accessing the Admin Menu

Follow the steps below to display the ADMIN menu in the 
USER FUNCTIONS screen.

1

Press the [USER FUNCTIONS] button on 
the control panel to access the USER 
FUNCTIONS menu.

2

Press the [ADMIN] tab.

• When the User Management function is disabled, you 

must enter the administrator password.
Proceed to the next step.

• When the User Management function is enabled, you 

must log into the MFP as a user with administrator 
privileges.
When you press the [ADMIN] tab, the ADMIN menu will 
be displayed.
Proceed to step 5.

Note

• If you log into the MFP as a user without administrator 

privileges, the [ADMIN] tab will be unavailable.
Setting role information allows you to give privileges to 
users. For details of role information, refer to the 

TopAccess Guide “Chapter 7: [User Management] 
Tab Page”

.

3

Press [PASSWORD].

The on-screen keyboard is displayed.
For details of the on-screen keyboard, see the following 
page:

P.227 "On-screen keyboard"

4

Enter the administrator password and 
press [OK].

The ADMIN menu is displayed.

Memo

• If the administrator password has not been changed 

before, enter the default administrator password 
“123456”.

• The input password appears as asterisks (*).

5

Proceed with the administrative operation 
that you require.

Pressing 

 on the ADMIN menu (1/2) displays ADMIN 

menu (2/2).

The USER FUNCTIONS screen contains the following 
buttons. For details of each button, see the corresponding 
page.

ADMIN menu (1/2)

ADMIN menu (2/2)

 

P.160 "GENERAL"

 

P.176 "NETWORK"

 

P.187 "COPY"

 

P.188 "FAX"

 

P.188 "FILE"

Summary of Contents for e-Studio477s









































































































































































































































































Reviews:

No comments