Toshiba e-studio4520C Management Manual Download Page 97

Page: 97 / 206

2.SETTING ITEMS (ADMIN)

Setting Network Functions 95

2 SETTING ITEMS (ADMIN)

Specify the following items as required and press

IPv6 PROTOCOL

— Press [ENABLE] to enable the IPv6 protocol, or [DISABLE] to disable the IPV6 protocol.

LLMNR

— Press [ENABLE] to enable the LLMNR (Linklocal Multicast Name Resolution) protocol, or [DISABLE] to

disable the LLMNR protocol.

ADDRESS MODE

— Select [STATEFUL].

Link Local Address

— The unique address used for the IPv6 is displayed.

The link local address cannot be connected to another routed IPv6 network.

[ENABLE] and [DISABLE] for the LLMNR protocol are available when you select [ENABLE] for the IPv6
protocol.

Specify the following items as required and press [OK].

DHCP (IP Address)

— Select whether or not the IPv6 address which is issued from the DHCPv6 server is used for

this equipment. Press [ENABLE] to use the address, or [DISABLE] to not use it.

DHCP (OPTIONS)

— Select whether or not the optional information (IPv6 address for the DNS server, etc.) except

the IPv6 address for this equipment, which is issued from the DHCPv6 server is used on this equipment. Press
[ENABLE] to use the information, or [DISABLE] to not use it.

In Stateful mode, you cannot assign [IP ADDRESS], [PREFIX] and [GATEWAY] manually.

Either the DHCP (IP Address) option or the DHCP (OPTIONS) option must be in [ENABLE].

Summary of Contents for e-studio4520C















































































































































































































Search results

Summary of Contents for e-studio4520C

Reviews:

Related manuals for e-studio4520C

Brands by name

Popular brands

Toshiba e-studio4520C, Management Manual

Search results

Summary of Contents for e-studio4520C

Reviews:

Related manuals for e-studio4520C

Brands by name

Popular brands