Toshiba e-studio4520C Management Manual Download Page 76

Page: 76 / 206

2 SETTING ITEMS (ADMIN)

74 Setting General Functions

Make settings for the weekly timer.

1) Press the desired day of the week button.
2) Press [ON] to enter the time that the device automatically turns on the power.

Use the arrow buttons to move the cursor and enter “Hour” and “Minute”.

3) Press [OFF] to enter the time that the device automatically turns off the power.

Use the arrow buttons to move the cursor and enter “Hour” and “Minute”.

4) Press [OK] to save the setting.

If you want to clear entered time to retype it, press the [CLEAR] button on the control panel.

If you want to disable the weekly timer function, enter the same time in both [ON] and [OFF] boxes.
Entering “00:00” for the ON time and “24:00” for the OFF time will also disable its function.

Setting the auto power save mode

Press [AUTO POWER SAVE].

The AUTO POWER SAVE screen is displayed.

Press the desired period of time (in minutes) that this equipment waits before the auto
power save mode is activated.

The auto power save mode setting is completed.

Summary of Contents for e-studio4520C















































































































































































































Search results

Summary of Contents for e-studio4520C

Reviews:

Related manuals for e-studio4520C

Brands by name

Popular brands

Toshiba e-studio4520C, Management Manual

Search results

Summary of Contents for e-studio4520C

Reviews:

Related manuals for e-studio4520C

Brands by name

Popular brands