Toshiba e-studio4520C Management Manual Download Page 47

Page: 47 / 206

1.SETTING ITEMS (USER)

Managing Address Book 45

1 SETTING ITEMS (USER)

Editing groups

The following procedure describes how to edit the name of groups, add or remove the members in groups.

Editing group names

Press [ADDRESS] in the USER menu.

The ADDRESS menu is displayed.

To display the USER menu, see the following page:

P.8 “Entering User Menu”

Press [GROUP].

The GROUP screen is displayed.

Press the group that you want to edit and press [EDIT].

The GROUP NO. edit screen is displayed.

If the touch panel does not display the group that you want to edit, press

to display the next screen.

Summary of Contents for e-studio4520C















































































































































































































Search results

Summary of Contents for e-studio4520C

Reviews:

Related manuals for e-studio4520C

Brands by name

Popular brands

Toshiba e-studio4520C, Management Manual

Search results

Summary of Contents for e-studio4520C

Reviews:

Related manuals for e-studio4520C

Brands by name

Popular brands