Toshiba e-studio4520C Management Manual Download Page 27

Page: 27 / 206

1.SETTING ITEMS (USER)

Printing Lists 25

1 SETTING ITEMS (USER)

Printing the address book information

Press [ADDRESS BOOK].

The ADDRESS BOOK menu is displayed.

Press [ID SORT] to print it as sorted by the ID number, or [NAME SORT] to print it as
sorted by the last name.

When the department management is disabled, the address book information is printed.

When the department management is enabled, the screen to input the department code is displayed. Enter the
department code using the digital keys and press [OK] to print the address book information.

For an output example of the address book information, see the following page:

P.178 “Address book information”

Summary of Contents for e-studio4520C















































































































































































































Search results

Summary of Contents for e-studio4520C

Reviews:

Related manuals for e-studio4520C

Brands by name

Popular brands

Toshiba e-studio4520C, Management Manual

Search results

Summary of Contents for e-studio4520C

Reviews:

Related manuals for e-studio4520C

Brands by name

Popular brands