Toshiba e-studio4520C Management Manual Download Page 164

Page: 164 / 206

3 MANAGING COUNTERS (COUNTER MENU)

162 Managing Department Code

Resetting all department counters

This function clears all department counters to “0”.

This function is available only when the department code is enabled.

This function clears only the department counters. You cannot clear the total counter.

In the DEPT. MANAGEMENT menu, press [RESET ALL COUNTERS].

The clear confirmation screen is displayed.

For instructions on how to display the screen above, see the following page:

P.158 “Logging on as administrator”

Press [YES] to clear all department counters.

Press [NO] to cancel the clear operation.

Summary of Contents for e-studio4520C















































































































































































































Search results

Summary of Contents for e-studio4520C

Reviews:

Related manuals for e-studio4520C

Brands by name

Popular brands

Toshiba e-studio4520C, Management Manual

Search results

Summary of Contents for e-studio4520C

Reviews:

Related manuals for e-studio4520C

Brands by name

Popular brands