Toshiba e-studio4520C, Management Manual

Page: 119 / 206

2.SETTING ITEMS (ADMIN)
Setting Copy Functions 117
2 SETTING ITEMS (ADMIN)
3
Specify the following items as required and press [OK].
AUTOMATIC CHANGE OF PAPER SOURCE — Selecting [ON] for this function and Automatic Paper Selection
(APS) allows the equipment to feed the same size of paper from a different drawer if the drawer from which paper
is being fed is empty. To learn more about APS, refer to the
Copying Guide .
PAPER OF DIFFERENT DIRECTION — Selecting [ON] for this function and the AUTOMATIC CHANGE OF
PAPER SOURCE option allows the equipment to feed the same size of paper that is set in a different direction if
the drawer from which paper is being fed is empty.
SUSPEND PRINTING IF STAPLER EMPTY — When this is set to [ON], this equipment quit the job with stapling
when the stapler empty occurs. When this is set to [OFF], this equipment will continue the job without stapling.
DEFAULT MODE OF AUTO COLOR — Press the default color mode for auto color.