Toshiba e-STUDIO287CS, User Manual, Page: 92 / 368

MANAGING PRINT JOBS FROM THE CONTROL PANEL
- 92 -
2
1
3
4
5
6
7
2
Press [LOG] to display the [LOG] tab.
3 Press [PRINT].
The Print Log is displayed.
On the Print Log, each job’s user name, date and time of
the job, paper size, the number of pages and the number
of copies are displayed.
Up to 1000 jobs can be listed on the log.
To display the previous or next page, press or .
The number of jobs displayed on a page may vary
depending on the equipment used.
To exit from the Print Log screen, press [CLOSE].
Memo
• If the equipment encounters an error while printing, it
records and displays an error code in the User Name
column. For details on print job errors and error codes,
refer to the
Troubleshooting Guide .
Checking Supplies
Viewing the drawer status
When the equipment is idle, pressing [JOB STATUS] >
[SUPPLY] displays the [SUPPLY] tab. From this tab, you can
view the paper size setting selected for each drawer. If you
press [SUPPLY] when printing is in progress, the drawer from
which paper is being fed is highlighted.
If you try to print a document from a client computer and
specify a paper size while none of the drawers or bypass
traymulti-purpose tray on the equipment has the specified size
of paper, a printing error occurs, and [JOB STATUS] blinks. In
this case, pressing [JOB STATUS] displays the [SUPPLY] tab,
from which you can learn which drawer needs additional
sheets of paper. For further instructions on how to clear a
printing error, refer to the
Troubleshooting Guide .
Checking remaining toner levels
Pressing [JOB STATUS] > [TONER] displays the [TONER] tab
from which you can check the approximate amount of toner
remaining in the toner cartridges.
If any of the toner cartridges is running out, be sure to get a
new cartridge ready. For more information about replacing
toner cartridges, refer to the
Troubleshooting Guide .