Toshiba e-STUDIO287CS, User Manual, Page: 59 / 368

PRINTING FROM Macintosh
- 59 -
2
1
3
4
5
6
7

Layout
In the Layout menu, you can set N-up printing (multiple pages
per sheet).
1) Pages per Sheet
This sets the number of multiple pages printed on one
sheet. The pages are reduced to fit the selected paper size
automatically and are printed.
- 1 — Select this if you do not wish to enable N-up
printing.
- 2 — Select this to print images from 2 pages arranged
on one sheet.
- 4 — Select this to print images from 4 pages arranged
on one sheet.
- 6 — Select this to print images from 6 pages arranged
on one sheet.
- 9 — Select this to print images from 9 pages arranged
on one sheet.
- 16 — Select this to print images from 16 pages
arranged on one sheet.
2) Layout Direction
This sets how pages are arranged on one sheet. This is
available only when N-up printing (printing multiple pages
on one sheet) is set.
- Across Left to Right Before Down — Pages arranged
horizontally from left to right and then top to bottom on
one sheet.
- Across Right to Left Before Down — Pages arranged
horizontally from right to left and then top to bottom on
one sheet.
- Down Before Across Left to Right — Pages arranged
vertically from top to down and then left to right on one
sheet.
- Down Before Across Right to Left — Pages arranged
vertically from top to down and then right to left on one
sheet.
3) Border
Select if a border line is to be drawn on each page.
- None — Select this if no border line is to be drawn.
- Single Hairline — Select this to draw a single hairline
for the border.
- Single Thin Line — Select this to draw a single thin
line for the border.
- Double Hairline — Select this to draw a double hairline
for the border.
- Double Thin Line — Select this to draw a double thin
line for the border.
4) Two-Sided
This sets whether or not you want to print on both sides of
the paper.
- Off — Select this when you do not want to print on both
sides of the paper.
- Long-Edge binding — Select this to bind along the
long edge side of the paper. The direction to be printed
on the back side of the paper differs depending on the
orientation.
- Short-Edge binding — Select this to bind along the
short edge side of the paper. The direction to be printed
on the back side of the paper differs depending on the
orientation.
5) Reverse page orientation
This sets the paper exit orientation. When the orientation of
the paper is reversed with this setting, the top of the paper
comes to the control panel side.
6) Flip horizontally
Select this check box to perform mirror printing of a page.
1
2
3
4
5
6
1
2
Landscape
1
2
Portrait
1
2
Landscape
1
2
Portrait